Vaporesso is without a doubt one of the major players when it comes to the top e-cig manufacturers and their new Polar Vape Mod starter kit shows off their experience to the fullest. A smart looking with many features giving all types of vapors the opportunity to modify their vaping experience to their exact requirement. But how does the new Vaporesso Polar starter kit compare against other models and is it one of the best box mods on the market? Only one way to find out, let’s take a look.
Vaporesso has taken a lot of time over the ergonomics of this box mod and the end result is stunning, it’s one of the best looking mods on the market. Available in a whole variety of colors including red, gold, silver, and grey along with multi-colored red and black, green and black, and also blue and black, all kits come with a matching tank color. You’re sure to find a color to suit.
For the number of features within the Polar box mod kit and holding dual 18650 batteries, Vaporesso has managed to keep the size relatively small at just 144mm total length (with the tank screwed on), 45mm wide and with a depth of 28mm. It also features a really nice and clear 2″ TFT color screen which is well laid out.
As we said it features a nice bright 2″ TFT color screen on the front, below which is the 3 menu buttons for up, down and select, below the buttons is the USB port for charging and firmware upgrades. The side has the larger fire button and the top features a spring loaded center located 510 thread for the tank. The battery door is held into positions by magnets where the two 18650 batteries go.
The screen shows a dual battery indicator, the vape mode, current wattage/temperature, resistance of the coil, voltage, and also has a puff counter and timer. Pretty standard but it is well laid out.
3 clicks of the center button below the screen gets you into the menu area, where you are presented with the menu screen as shown in the picture above. Here you can select and adjust all the features including setting the vape mode from VW-H (hard), VW-N (normal) or VW-S (soft). Other settings you can adjust here are the CCW which is your custom power curve where you can adjust the wattage per decimal second when the fire button is pressed, SP mode is the super player mode which allows you to use resistance coils from 0.03 – 5ohms. You can also use voltage mode and again set a custom power curve per decimal second as we saw before, these are represented by the VV (variable voltage) and CCV (custom curve voltage) respectively in the menu screen.
The other menu options include selecting the coil type if you want to use temperature control, these include SS for stainless steel, Ni for Nickel, and Ti for titanium each of which you can adjust the wattage and set your custom power curve again. You also have 2 memory settings and can switch the mod into bypass mode, so it functions like a regular mechanical mod but with all the safety features.
Of course you can adjust all the regular settings of the mod like the time, brightness, puff counters and the screen colors within the Set (settings) area.
Pretty impressive really, has pretty much every setting available and trumps other mod kits like the Wotofo Flux starter kit that just has wattage modes!
Along with the Vaporesso Polar vape mod, the starter kit includes the Cascade Baby SE tank which holds 6.5ml of e-liquid and measures 24.5mm in diameter. The tank has bottom fed airflow with 3 slits which are adjustable. The top has a 510 Delrin drip tip.
The Cascade Baby SE tank also features a top-fill function which we see on most of the newer sub ohm tanks, but the Cascade SE requires you to lift the top cap then slide it open. There is an arrow to help you find where to slide it and you are presented with the reasonably sized fill hole.
The tank comes complete with 2 coils, one is the 0.15 quad head for vaping between 50-110 watts and the 0.18 mesh coil which can be vaped between 50-85 watts. In our opinion, the mesh coils produce the better flavor.
The tank can also be completely disassembled to clean after changing flavors if you desire.
The Cascade Baby SE Tank is a great addition the Vaporesso has included in the Polar Starter kit and is easily one of the best sub ohm tanks on the market to capture the full flavor of your juice, especially when using the included mesh coil at around 55-60 watts.
For the number of features the vape mod has, it’s reasonably easy to navigate, but how does it perform?
We’re testing it in normal wattage mode, set the strength to normal, using the mesh coil ar 55 watts and using a 70/30 VG/PG e-liquid. Boy, is this vape mod responsive, even in normal mode! You get an instant response thanks to the OMNI Board 4.0 chipset within the device, and the flavor from the tank is truly refreshing.
The Vaporesso dual 18650 Polar starter kit is a great kit, it’s really that simple! One of the best tanks on the market coupled with a super responsive and great designed vape mod which has an awesome user interface to explore all the features of this mod. The most competitive mod on the market at the moment is the Smok Devilkin, and in our opinion the Vapresso Polar kit is better, yes, it’s that good!
If your new or an old-time, experienced vaper, the Polar kit will not disappoint!
Buy The Vaporesso Polar
Avoid Clones! Use coupon: dna10